Getting started with Airtable form views

To create a new form view, start by navigating to the table where you'll be collecting your new data. Open the view sidebar, then underneath the Create heading click the Form option. If your view creation section is collapsed, you will need to first expand it.

You'll have the opportunity to give the form view you are creating a unique title and set the view as Collaborative or Personal. Note, that you can't lock a form view until after you have finished the initial form view setup. When you have the title and view permissions set, click Create new view.

This will bring up the form builder, which you can use to customize the form further before sharing it with others. Permium plans offer the ability to Add a cover image or Add a logo to a form. You can give your form a description by clicking in the header section where it says Add a description for this form.

The fields on your form are automatically populated based on all of the fields shown in the grid view that appears first in the table. 

• To change the order of the fields on your form, click on a field and drag the field using its drag handle.
• To hide a field from the form, you can either click the hide button in the top right corner of the field you wish to hide or drag and drop the field to the left side of the form builder.
• To add a field to the form, drag it from the left side onto the form.
• If you realize that you want to add a field to your form that doesn't yet exist in your table, then you can click the + Add a field to this table button in the Fields sidebar.

In addition to customizing which fields will appear on your form and their order, you can also adjust how a field will display to end users. Clicking on any of the fields in the form builder will bring up a number of display options. For all field types, you can change the field's name as it will appear on the form and add a subtitle to offer helpful context. Certain field types offer additional display settings options that are covered in a section below. 

You can also toggle the Required option to make a field required before a form can be submitted. Note that if you make a checkbox field required, the box will have to be checked in order for the form to be submitted.

After customizing form fields, you can also configure what will happen after a form has been submitted. These options appear at the bottom of the form builder:

• Edit the submission label (Premium feature only)
• The ability to collect respondent email addresses automatically
• Allow people to request a copy of their responses (Premium feature only)
• Show/Hide Airtable branding (Premium feature only)
• Redirect submitters to a URL after the form is submitted (Premium feature only)
• Display a custom message after submission
• Show a "submit another response" button
• Show a new blank form
• Email the form's creator after each submission

These configuration options are covered in more depth below.

Once you're done building your form, you can click the share form button in the view bar. This will give you a link that you can copy and paste. Clicking the preview button will also bring you directly to the form's share link in your browser. Additional form-sharing options are covered in another section below.

To add a cover image, click anywhere in the gray region where it says Add a cover image and upload the desired image. You can also crop or rotate the image in the file picker. As a note, the area of the form cover image is always 240px tall, and the width is the width of your browser window. It’s best to use the cover image for background graphics and adding a fun touch to your form, rather than for important information which may potentially get clipped out.

To add a logo, click on the Add a logo option and upload the desired image.

To customize the form submission button/label, double-click the Submit button, add the text of your choice, and press return/enter.

Toggling on this feature will automatically collect a form submitter's user information so that form responses can be tracked to a specific person. A few notes about expected behavior:

• Form submitters will be asked to sign into Airtable (if they aren't already signed in on their browser) or make an Airtable user account so their name and email address can be collected with their form submission.
• The respondent's information will appear in a Created by field in the table where the form has been created. 
• If the form doesn't already contain a Created by field, then a new field will be created in the table where the form has been created. 
• If a Created by field or fields already exist in the table, then respondents will populate those existing Created by fields after this toggle has been turned on. Note that submissions made before this option was turned on may appear as "Anonymous."

When this option is toggled on, a form submitter will be able to enter an email address for a copy of their response to be sent. Note that the email sender will appear as "noreply@airtable.com" which cannot be customized. 

As a workaround, you can use the feature covered above to collect a form respondent's email address and then set up a custom notification with Airtable Automations that will allow for more customization.

To add or remove Airtable branding from the form, click the Show Airtable branding button, located at the bottom of the form builder.

If you check the Redirect to URL after the form is submitted toggle, a prompt will appear for you to enter the redirect URL. This can be a URL internal to Airtable like links to a specific base or view, invite links, or an interface page. Or you can redirect submitters to other, publicly available, URLs.

One particularly helpful use case involves using the {record_id} variable. You can use this to redirect the submitter of the form to the record that they've just created (assuming that the form submitter has access to the base). 

If you don't have a redirect URL, you can customize the message that will be shown once a form has been submitted by typing it in the Show this message box.

If you don't have a redirect URL, toggle this option to show a button after a form has been submitted that will allow the user to submit the form again.

If you don't have a redirect URL, toggling this option will make it so that after a form is submitted, the submitter will automatically be redirected to the form page after five seconds of waiting.

You can also choose whether or not to have email notifications sent to you after a form has been submitted.

Note that the email address to which the notifications will be sent is determined by email associated with the account of the user who is logged into Airtable and interacting with that particular form view—more than one user can go into the form and check the appropriate box in order to get notifications sent to the email address associated with their Airtable account.

Single select, multiple select, and user fields offer the option of showing the field options as a dropdown or as a list. For single select and single user fields, showing the field as a list will cause the options to display as radio buttons; for multiple select and multiple user fields, showing the field as a list will cause the options to display as checkboxes.

For single select, multiple select, and user fields, you have the option of limiting the available options on the form so that not all options will be visible to the person filling out the form.

To do this, click the Limit selection to specific options toggle. This will bring up a dialog window in which you can pick which options will be available for the people filling out the form. Click the Use selected options button to save your selections.

If you've decided to "Limit selection to specific options", the form builder will show the number of options that have been selected. You can alter which options have been selected by clicking the Change selected options button.

For linked record fields, you can use filtered views to control which linked records can be selected by the people filling out your form. To do this, click on the Limit record selection to a view toggle. This will bring up a dropdown menu showing all of the different views in the table to which the linked record field is linked. (If you don't have the filtered view that you need, you'll need to go to the appropriate table and make one.)

By selecting a view from this dropdown, the people filling out the form will only be able to select the linked records available in the specified view.

If you try and change the filters for a view that's being used to limit record selection in a form elsewhere, you'll see a notice telling you which form from which table is using this view's filters.

If you've already limited a linked record field's selection to a view from the view's configuration menu, you can override that limitation and limit linked record selection to a different view.

Using this option will allow you to create a password to help prevent access to the form you are creating. After creating a password, users with Editor permissions or higher in that base will be able to change the password or toggle this option off to remove password protection.

To help further secure access to a form, an option to Restrict access to an email domain can also be used. Note that while any email domain can be chosen for this feature, only one domain can be set per form. As a workaround, you can duplicate a form view and set up a different domain restriction. This will, however, generate a different URL to access that form.

To stop accepting new form submissions you can toggle the "Stop accepting new responses" option on. This differs from disabling the form as it will keep the current form share link active in case you want to open the form again at a later time.

You can then type in a custom message that will show if someone attempts to access the form while it is in a non-response mode. By default, a "This form is not accepting responses." message will appear. If you later want to open the form again, simply toggle this option off.

Syncing a view to another base is covered in other support articles in this section of the help center.

You can embed a form on a webpage by clicking on the option to "Embed this form on your site" from the "Share form" menu:

This will take you to a page where you can view the code necessary to embed your form on a website and see a preview of what the embedded form will look like in both desktop and mobile formats.

To learn more about the process of using an iframe to embed a form view on a webpage, please see this support article.

If you need to disable the form link, click on the Share form button and then the X Disable shared view link option. Alternatively, you can regenerate the form link by clicking on the refresh button next to the URL. We cover deleting a form altogether in the next section.

Submissions via forms will show up as a new record at the bottom of a grid view so long as the grid view is not filtering or grouping the records in some way that would cause the submission to be hidden or show up in a different order.

At the moment, mobile versions of Airtable do not allow you to create or view in the native Airtable app. In order to submit a form, you must use a share link in your device's browser.

Forms do not natively support the ability to update records. However, a workaround using linked records as well as our Automations feature can be used to create a workflow that will update records. 

You might also consider using Airtable's Interface Designer feature in certain use cases. Learn more about Interface Designer here.

No, currently Airtable forms cannot be split or paginated.

You can remove the Airtable label from forms on our Airtable Plus or Pro plans, but it isn't currently possible to remove all Airtable branding or add your own custom branding within the Airtable UI.

Yes, this can be accomplished in a few different ways. Here are two ideas to consider:

1. Automations - Using the "When a form is submitted" trigger, you can build an automation that will append information to a form response as they are received.
2. Prefilling/Hiding - Our "Prefilling a form" article goes into more depth, but essentially you can construct a URL that will prefill and hide a field or fields that are part of a form.

We do not currently support creating custom sections, or headers, within the form view. However here is a workaround suggested by the Airtable Community, where you can create a visual difference in a form by creating a single select field with no options, then adding it to a form as a list: